COMPACTSTAT: Hardware specifications

Productinfo

Hardware specs

System Performance:
Current compliance	±30 mA (±1 mA in USB powered mode)
Maximum output Voltage	± 7.5 V
Potentiostat Bandwidth	>1 MHz
Stability settings	High Speed, Standard, and High Stability
Programmable response filter	1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition	dual channel 16 bit ADC, 100.000 samples/sec

Potentiostat:
Applied potential range	±4.096 V, with 0.125 mV resolution
Applied potential accuracy	0.2%, or 2 mV
Current ranges	±10 nA to ±10 mA
High sensitivity current ranges	±1 pA, ±10 pA, ±100 pA, ±1 nA
Measured current resolution	0.015% of current range, minimum 0.15fA

Galvanostat
Applied current resolution	0.0125% of applied current range
Applied current accuracy	0.2%
Potential ranges	±0.4 mV, ±4 mV, ±40 mV, ±0.4 V, ±4 V
Measured potential resolution	0.003% of potential range, minimum 16nV

Impedance Analyser
Frequency range	10µHz to 2MHz
Amplitude	0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset	16 bit dc offset subtraction, and 2 dc-decoupling filters
Dynamic range	4 nV to 4 V, and 0.05 fA to 30 mA

Electrometer
Input impedance	>1000 Gohm //<8pF
Input bias current	<10 pA
Bandwidth	>16 MHz

Special functions
Ohmic drop compensation	2 V/current range, 16 bits resolution
Safety features	automatic disconnect on internal/external exceptions

Peripheral connections
8 Analog in, and 2 analog out	0 to +4 V, 16 bits resolution
2 Digital inputs, and 3 Digital outputs	0 to +5 V
I-out, and E-out	analog monitor for cell current and potential
AC-out	±0.5 V sinewave 10µHz-2MHz with variable attenuation
Channel-X, and Channel-Y inputs	±4 V: to record impedance from peripheral devices

Environment
Power requirements	in USB powered mode: standard 5 V, 500 mA external adapter: 100-240 V, 45-65 Hz, 6 VA
Interfacing	USB 1.1 or 2.0 compliant
Size	w x d x h = 12 x 26 x 2.5 cm
Weight	0.6 kg
PC requirements	Windows XP or Vista, with free USB port