IviumStat.XR: Hardware specifications

Productinfo

Hardware specs

XR Hardware specs

System Performance:
Current compliance	±5 A	±2A	±10A
Maximum output Voltage	±20V	±50V	±10V
Potentiostat Bandwidth	1 MHz for small signals, 300kHz for large signals
Stability settings	High Speed, Standard, and High Stability
Programmable response filter	1MHz , 100kHz , 10kHz , 1kHz , 10Hz
Signal acquisition	dual channel 16 bit ADC, 100.000 samples/sec

Potentiostat:
Applied potential range	±10 V, with 0.33mV resolution ±20 V, with 0.66mV resolution ±50 V, with 1.65mV resolution
Applied potential accuracy	0.2%, or 2mV
Current ranges	±10nA to ±10A in 10 steps
High sensitivity current ranges	±1pA, ±10pA, ±100pA, ±1nA
Measured current resolution	0.015% of current range, minimum 0.15fA

Galvanostat
Applied current resolution	0.033% of applied current range
Applied current accuracy	0.2%
Potential ranges	±1mV, ±10mV, ±100mV, ±1V, ±10V
Measured potential resolution	0.003% of potential range, minimum 40nV

Impedance Analyser
Frequency range	10µHz to 2MHz
Amplitude	0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset	16 bit dc offset subtraction, and 2 dc-decoupling filters
Dynamic range	12nV to 10V, and 0.05fA to 5A

Electrometer
Input impedance	>1000 Gohm //<8pF
Input bias current	<10 pA
Bandwidth	>16 MHz

Special functions
Ohmic drop compensation	2 V/current range, 16 bits resolution
Safety features	automatic disconnect on internal/external exceptions

Peripheral connections
8 Analog in, and 2 analog out	0 to +4V, 16 bits resolution
2 Digital inputs, and 3 Digital outputs	0 to +5V
I-out, and E-out	analog monitor for cell current and potential
AC-out	±0.5V sinewave 10µHz-2MHz with variable attenuation
Channel-X, and Channel-Y inputs	±4V: to record impedance from peripheral devices

Environment
Power requirements	100-240V, 47-63Hz, 150VA
Interfacing	USB 1.1 or 2.0 compliant
Size	w x d x h = 26 x 33 x 12 cm
Weight	4.0 kg
PC requirements	Windows XP/Vista/7, with free USB port