Skip to Content

pocketSTAT: Hardware specifications

Printer-friendly versionPrinter-friendly version
Productinfo Hardware specs
System Performance:
Current compliance ±10 mA
Maximum output Voltage ± 8 V
3 Electrodes WE, CE, RE and GND (2mm banana plugs)
Potentiostat Bandwidth >1 MHz
Stability settings High Speed, Standard, and High Stability
Programmable response filter 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition dual channel 16 bit ADC, 5000 samples/sec
Electrode connection RE/WE/CE and GND lead, 2mm banana plugs
   
Potentiostat:  
Applied potential range ±4 V, 0.125 mV resolution
Applied potential accuracy 0.2%, or 2 mV
Current ranges ±1 nA to ±10 mA in 8 decades
Measured current resolution 0.015% of current range, minimum 0.15pA
Measured current accuracy 0.2%
   
Galvanostat  
Applied current resolution 0.0125% of applied current range
Applied current accuracy 0.2%
Potential ranges ±0.4 mV, ±4 mV, ±40 mV, ±0.4 V, ±4 V
Measured potential resolution 0.003% of potential range, minimum 16nV
Measured potential accuracy 0.2%, or 2 mV
   
Impedance Analyser  
Frequency range 10µHz to 100 kHz
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, 2 dc-decoupling filters
   
Electrometer  
Input impedance >1000 Gohm //<20pF
Input bias current <10 pA
Bandwidth >2 MHz
   
Environment  
Power requirements via USB 
Interfacing USB
Size  w x d x h = 11.5 x 5.85 x 1.25 cm
Weight 140 gram
Waterproof IP44
PC requirements Windows XP/7/8/10, with free USB port

Specifications subject to change, Ivium Technologies © 2016